Tabletop beaming and threading holder

£5.00£181.00

The Tabletop Beaming and Threading Holder is a tool for threading a ready-made warp, or winding and threading your own warp while sitting at a table. It is much gentler on your back and shoulders than winding and warping on the loom.

To beam on your own warps you will need the dividing bar.

This tool can be used for both the 60 series looms and the Piccolo. See below for optional extras to save taking parts off your loom, and essential extras to adapt the holder for the Piccolo.

 

 

Clear
Share with a friend...

Description

 

60 Series 

Optional extras: Warp beam with handle, reed holder.

When making your own warp you will also need the dividing bar (to spread the warp threads to the correct width), a warp extension kit and an extra tying rod.

Piccolo

Essential extras: reed holder,  pipes holder for the reed and pipe holders for the harnesses.

Optional extra: a warp beam to save you removing the one from your loom.

When making your own warp you will also need the dividing bar (while not designed for the piccolo it could be ‘bodged’ to fit), a warp extension kit and an extra tying rod.

Full instructions included.

Additional information

Weight N/A
Options

Tabletop Beaming and Threading Holder, 60 series warp beam, Piccolo warp beam, Reed holder, Pipe holders for Piccolo reed, Pipe holders for Piccolo harnesses, Dividing bar, 60 series warp extension kit, Piccolo warp extension kit, 60 series tying rod, Piccolo tying rod